2020-03-25 1578
1、 Super feed ratioThe feed ratio is very small, usually around 1: (1.1-1.25). The decorative yarn is clamped between the core yarn and the fixed yarn, and twists and turns into a waveform towards the
2020-03-09 1332
Printing is usually described as dyeing at certain areas of the striped pattern. Obtaining interesting patterns on fabrics can be achieved through several methods, including changes in yarn (fancy yar
2020-01-13 3582
Both air wrapped yarn and mechanical wrapped yarn are classified as core wrapped yarn. Core spun yarn is generally made by twisting synthetic fiber filaments with good strength and elasticity as the c
2019-12-30 1970
Chenille yarn has various postures and varieties, which can create rich visual effects and meet various planning requirements, especially in the field of decorative fabrics, which has become quite pop
2019-12-19 3027
Which is warmer, a pair of nylon socks or a pair of cotton socks? Conduct an experiment .....Test methodYou can take two pieces of ice of the same size and shape in the refrigerator, wrap them in two
2019-12-09 2187
When people buy clothes, they usually write the fabric composition, cotton content, nylon content, and polyester content on the clothes label. However, most of the time, they do not know what informat
2019-11-28 2038
We often say how much D is nylon fiber, but D actually indicates the fineness of nylon fiber. The degree of thickness of natural silk or chemical fibers is indicated by the proportion of fibers of a c
2019-11-18 3092
Nylon has good moisture absorption, the highest strength among synthetic fibers, good resilience, low glass transition temperature, poor alkali resistance, and poor light resistance.1. Strength: Nylon
2019-11-07 1262
Nylon fabric is known for its excellent wear resistance. Nylon has the advantages of wear resistance, moisture absorption, and excellent elasticity. It is easily deformed under small external forces,
2019-10-28 1273
Nylon filament is a continuous long filament. During the nylon manufacturing process, the spinning fluid is extruded from the spinning nozzle one after another, cooled by air or condensed into filamen